P1697 Pcm Failure Sri Mile Not Stored

The most likely cause of this problem is a faulty PCM (Powertrain Control Module). The PCM is the computer that controls the engine and transmission. It is located under the hood, usually on the driver’s side.

If the PCM fails, it will not be able to store information about the engine or transmission. This can lead to problems starting the engine, shifting gears, and even stalling.

If you’re the owner of a Chevrolet Captiva, you might be interested to know that there is a recall affecting certain models of this vehicle. The problem is with the powertrain control module (PCM), which may fail and cause the engine to stall. This can obviously be very dangerous, so if you own a Captiva, it’s important to bring it in to your dealership for service as soon as possible.

In the meantime, here’s some more information about this recall. The affected Captivas are from the 2012 model year. Only certain vehicles are included in the recall; specifically, those with VINs ending in “3075” through “4817.”

If your Captiva falls into this category, then it will need to have its PCM replaced. The good news is that this repair will be covered by Chevy under their warranty program. If your Captiva is affected by this recall, don’t delay in getting it fixed.

A failed PCM can lead to all sorts of problems, including stalling at high speeds and increased risk of accidents. Thankfully, Chevy is taking care of this issue and making sure that all affected owners can get their cars repaired quickly and easily.

P1697 Pcm Failure Sri Mile Not Stored

P1697 Code on Jeep

If your Jeep is displaying a P1697 code, it means that there is an issue with the Powertrain Control Module (PCM). The PCM is responsible for controlling the engine and transmission, so this error code indicates a problem with one of those systems. There are several potential causes for a P1697 code, so it’s important to have your Jeep diagnosed by a professional to get an accurate repair.

Some common causes for this code include:

  • A faulty engine coolant temperature sensor
  • A damaged or shorted circuit in the PCM itself
  • A problem with the fuel delivery system

Depending on which of these is the root cause of your Jeep’s P1697 code, the repairs will vary. A faulty coolant sensor can be replaced relatively easily, but if the PCM itself is damaged, it will need to be replaced which can be quite expensive.

If you’re having trouble with your Jeep’s engine or transmission, make sure to have it checked out as soon as possible to avoid further damage.

Chrysler P1697

The Chrysler P1697 is a code that indicates a problem with the vehicle’s engine control module (ECM). This code is often associated with other codes, such as P0300, P0302, and P0304. The ECM is responsible for controlling the engine’s ignition timing and fuel injection system.

When the ECM detects a problem with these systems, it will store the P1697 code. Symptoms of the P1697 code include:

  • Check Engine Light is illuminated
  • Engine may run rough or stall – decreased fuel economy

Possible causes of the P1697 code include:

P1697 Pcm Failure Sri Mile Not Stored

Credit: acurazine.com

Q: What is the P1697 Pcm Failure Sri Mile Not Stored Code

A: The P1697 PCM Failure SRI Mile Not Stored code indicates that the miles since the last service reset have not been stored in the Powertrain Control Module (PCM).

This can be caused by a variety of factors, including a loose connection, bad ground, or failed PCM. If you’re getting this code, it’s important to have your vehicle diagnosed by a qualified technician so they can determine the root cause and make the necessary repairs.

Q: How Do I Fix a P1697 Obd-Ii Trouble Code

If your car is displaying a P1697 trouble code, it means that there is an issue with the engine control module (ECM). The ECM is responsible for controlling the engine and its various systems. When it detects a problem, it will store a trouble code in its memory.

You can read this code using a special diagnostic tool called an OBD-II scanner. There are several possible causes of a P1697 trouble code. One common cause is a faulty oxygen sensor.

Another possibility is an issue with the ECM itself. If you suspect that the ECM is to blame, you’ll need to take your car to a mechanic or dealer for further diagnosis and repairs. In some cases, a P1697 trouble code may be caused by something as simple as loose wiring or a blown fuse.

If this is the case, you should be able to fix the problem yourself relatively easily. However, if the cause of the code is more serious, such as a faulty oxygen sensor or ECM, you’ll need professional help to get your car back on the road again.

Q: What are the Symptoms of a P1697 Code

If you have a P1697 code, it means that your car’s engine is having difficulty adjusting to different types of fuel. This can lead to a number of problems, including:

  • Reduced fuel economy
  • Poor engine performance
  • Stalling and starting issues
  • Rough idling

If you’re experiencing any of these symptoms, it’s important to take your car to a mechanic for diagnosis and repairs. Ignoring the problem could lead to further damage to your engine.


The blog post discusses a common issue with the Porsche 911 Carrera – the P1697 PCM failure code. The code indicates that there is an issue with the engine’s control module, and it can often be caused by a simple software update. However, if the problem persists, it may be necessary to replace the entire control module.

The blog provides instructions on how to troubleshoot and fix the problem.