P1690 Fuel Injection Pump Ckp Sensor Does Not Agree With Ecm Ckp Sensor

The problem may be caused by a faulty ECM, or it may be caused by a problem with the CKP sensor itself. If the ECM is at fault, it will need to be replaced. If the CKP sensor is at fault, it will need to be repaired or replaced.

If you’re getting a P1690 code on your vehicle, it means that the fuel injection pump’s CKP sensor isn’t agreeing with the ECM’s CKP sensor. This can be caused by a few different things, but the most likely culprit is a faulty CKP sensor. If you suspect that this is the case, the best course of action is to take your vehicle to a qualified mechanic or dealership for diagnosis and repair.

P1690 Fuel Injection Pump Ckp Sensor Does Not Agree With Ecm Ckp Sensor

Po335

The OBD code P335 is a generic powertrain code related to the crankshaft position sensor. The PCM (powertrain control module) uses information from the crankshaft position sensor to determine engine speed and ignition timing. This code may be triggered when the crankshaft position sensor signal is missing or erratic, or when there is an issue with the wiring harness between the sensor and PCM.

If you’re experiencing this code, it’s important to have your vehicle checked out by a qualified mechanic as soon as possible. In some cases, this may simply be a loose wire or connector that can be easily fixed. However, it could also indicate a more serious problem with the crankshaft position sensor itself or other components in the engine.

Don’t take chances with your vehicle – get it checked out if you see this code.

P0336

If your check engine light is on, and you’ve determined that the code P0336 is the cause, here’s what you need to know. This trouble code indicates that there is a problem with the crankshaft position sensor or its wiring. The crankshaft position sensor monitors the rotation of the crankshaft and sends a signal to the computer indicating its position.

If there is an issue with this sensor, it can cause all sorts of problems with your engine, including stalling, misfiring, and poor fuel economy. In most cases, replacing the sensor will take care of the problem. However, if there is damage to the wiring harness, that will need to be repaired as well.

In either case, it’s best to have a professional mechanic diagnose and repair this problem for you.

P1690 Fuel Injection Pump Ckp Sensor Does Not Agree With Ecm Ckp Sensor

What is the P1690 Fuel Injection Pump Ckp Sensor

The P1690 Fuel Injection Pump Ckp Sensor is located on the diesel fuel injection pump. It measures the position of the pump’s piston as it moves up and down inside the cylinder. The sensor sends a signal to the engine control module (ECM) which then uses this information to control fuel injector timing.

If there is an issue with the sensor, it can cause problems with the engine starting, idling, and acceleration.

What Does the P1690 Fuel Injection Pump Ckp Sensor Do

The P1690 Fuel Injection Pump Ckp Sensor is responsible for monitoring the position of the fuel injection pump. It does this by measuring the rotational speed of the pump and comparing it to a reference signal. If the sensor detects that the pump is not rotating at the correct speed, it will send a signal to the engine control module (ECM) to activate the check engine light.

The ECM may also take other corrective actions, such as reducing fuel flow to the engine.

How Does the P1690 Fuel Injection Pump Ckp Sensor Work

The P1690 Fuel Injection Pump Ckp Sensor is a sensor that is used to monitor the position of the fuel injection pump. This sensor is located on the side of the fuel injection pump and is used to monitor the position of the plunger as it moves up and down. The signal from this sensor is used by the engine control module (ECM) to determine when to fire the injectors.

Why is the P1690 Fuel Injection Pump Ckp Sensor Important

The P1690 Fuel Injection Pump Ckp Sensor is important because it helps to ensure that the fuel injection pump is operating correctly. Without this sensor, the engine could run too lean or too rich, which could lead to engine damage.

1998-2002 P-1693 code dodge Cummins “No bus” ACTUAL easiest fix trick

Conclusion

If your P1690 Fuel Injection Pump CKP Sensor doesn’t agree with your ECM CKP Sensor, it’s time to check for a few things. First, check the wiring harness for any loose, damaged, or corroded wires. Next, check the connectors at the ECM and fuel injection pump for any damage or corrosion.

Finally, check the ground connections at the battery and engine block for any loose or damaged wires. If you find any of these issues, repair them as soon as possible to prevent further damage to your vehicle.