Troubleshooting P1290 CNG Fuel Pressure Too High

P1290 CNG Fuel Pressure Too High is a diagnostic trouble code (DTC) that indicates the pressure of the compressed natural gas (CNG) fuel system is too high.

When this error code is triggered, it signifies that the fuel pressure within the CNG system has exceeded the specified range, resulting in an imbalance that can impact engine performance and efficiency.

This can happen when there are issues with the CNG injectors, regulator, or fuel lines. It can also occur if there’s an issue with the ECU settings or if something else has caused a restriction in the system.

In this article, we will discuss the details of this error code, explore the symptoms of high CNG fuel pressure, and provide a comprehensive guide to troubleshooting and resolving the issue.

Symptoms of High CNG Fuel Pressure

Troubleshooting P1290 CNG Fuel Pressure Too High

Experiencing symptoms associated with high CNG fuel pressure is a clear indication that there might be an issue within the fuel system. Some common symptoms include:

  • Rough Idling: The engine might experience erratic idling or even stalling due to the imbalance caused by excessive fuel pressure.
  • Poor Fuel Efficiency: High fuel pressure can lead to an incorrect air-fuel mixture, resulting in reduced fuel efficiency and increased fuel consumption.
  • Engine Misfires: Misfires can occur as a result of improper combustion caused by the incorrect fuel-air mixture.
  • Check Engine Light: The illumination of the check engine light on the dashboard is often the first sign of a problem. Retrieving the error code using a scan tool will reveal the specific issue, such as P1290.
  • Potential Engine Damage: If left unaddressed, high fuel pressure can lead to long-term damage to engine components, including valves, pistons, and the exhaust system.

Read More About: P1199 Radiator Temperature Sensor Voltage Too Low

Diagnostic Steps of the P1290 Error Code

To effectively troubleshoot the P1290 error code and identify the root cause of the high CNG fuel pressure, follow these diagnostic steps:

Step 1: Initial Inspection

Start by visually inspecting the CNG system components for any obvious issues. Check for visible leaks, damaged hoses, and disconnected connections. Any signs of leaks should be addressed promptly, as they can contribute to pressure imbalances.

Step 2: Using Diagnostic Tools

Utilize a scan tool to retrieve the error code and gather additional information about the problem. The scan tool will provide insights into the specific sensor readings and system parameters that are triggering the error code.

Step 3: Pressure Testing

Perform a pressure test using a CNG pressure gauge. This test will help you determine whether the actual fuel pressure matches the desired specifications. If the pressure is indeed too high, proceed with further diagnostics.

Step 4: Checking Components

Inspect the fuel pressure sensor, fuel pressure regulator, and fuel injectors for any signs of malfunction. A faulty sensor might be providing incorrect readings, while a malfunctioning regulator could be causing the pressure to rise.

Also Read: P1498 High Speed Rad Fan Ground Ctrl Rly Circuit

Potential Causes of High CNG Fuel Pressure

Potential Causes of High CNG Fuel Pressure

Several factors can lead to high CNG fuel pressure. Understanding these potential causes is essential for accurate troubleshooting:

1. Faulty Fuel Pressure Sensor

A malfunctioning fuel pressure sensor can send incorrect readings to the engine control module, causing it to miscalculate the appropriate fuel pressure regulation.

2. Malfunctioning Fuel Pressure Regulator

The fuel pressure regulator is responsible for maintaining a consistent fuel pressure. If it fails to do so, the pressure might spike and trigger the error code.

3. Stuck or Damaged Fuel Injector(s)

A stuck open fuel injector can release more fuel than necessary into the system, leading to increased pressure. Damaged injectors can also disrupt the fuel-air mixture.

4. Issues with the Pressure Relief Valve

If the pressure relief valve, designed to release excess pressure, becomes faulty or clogged, it can prevent pressure from being properly regulated.

How to fix P1290 Error Code

Based on the diagnostic results, you can proceed to address the issue by following these steps:

i. Repairing or Replacing the Fuel Pressure Sensor

If the sensor is providing incorrect readings, consider replacing it with a new one. Ensure that the replacement sensor is compatible with your vehicle’s make and model.

ii. Cleaning or Replacing the Fuel Pressure Regulator

In the case of a malfunctioning regulator, you might be able to clean it to restore functionality. If cleaning doesn’t work, replacement might be necessary.

iii. Inspecting and Repairing/Replacing Fuel Injectors

Stuck or damaged fuel injectors should be inspected individually. If cleaning doesn’t resolve the issue, replacement might be needed. Ensure that all new components are properly calibrated.

Read More About: P1683 Speed Control Power Relay Or Speed Control 12 Volt Driver Circuit Open Or Shorted

Frequently Asked Questions

1. What does the P1290 error code mean?

The P1290 error code indicates that the Compressed Natural Gas (CNG) fuel pressure within the system is too high.

2. What are the symptoms of high CNG fuel pressure?

Some common symptoms include rough idling, poor fuel efficiency, engine misfires, the illumination of the check engine light, and potential damage to engine components.

3. Can I continue driving my vehicle with the P1290 error code?

While you might be able to drive with the error code active, it’s not recommended. High CNG fuel pressure can negatively impact engine performance and efficiency, potentially causing further damage if left unresolved.

4. Can a faulty fuel pressure sensor trigger the P1290 code?

Yes, a malfunctioning fuel pressure sensor can provide incorrect readings to the engine control module, leading to miscalculations in fuel pressure regulation and the activation of the P1290 error code.

5. Can high CNG fuel pressure cause engine damage?

Yes, if not addressed in a timely manner, high CNG fuel pressure can lead to engine damage. Components such as valves, pistons, and the exhaust system can be adversely affected.

6. Can I clear the P1290 error code on my own?

Yes, after successfully addressing the issue causing the high CNG fuel pressure, you can use a scan tool to clear the error code. This step confirms that the problem has been resolved.

Bmw Dtc 10C151

Troubleshooting P1290 CNG Fuel Pressure Too High

The main reason for triggering a DTC 10C151 is when there is something wrong with the catalytic converter or its related components.

The catalytic converter works by converting harmful gasses into less harmful ones before they are released into the atmosphere.

When something goes wrong with this component, such as when it becomes clogged or blocked by debris, it can cause exhaust gases to build up in your engine and trigger a fault code like DTC 10C151.

Also Check: P1499 Open Or Shorted Condition Detected In The Hydraulic Cooling Fan Solenoid Control

Bmw Dtc 109001

What is DTC 109001? DTC 109001 stands for Diagnostic Trouble Code. It indicates that there is an issue somewhere within your BMW’s VDC system.

The exact cause of the malfunction can vary depending on the age and model of your car; however, it typically involves a fault in one or more sensors associated with VDC such as wheel speed sensors or ABS sensors.

In some cases it could even be due to faulty wiring or a failing component related to VDC such as brake lights or traction control systems. How Can You Fix It?

Bmw 10A208

The BMW 10A208 offers impressive handling capabilities thanks to its lightweight aluminum suspension components, Active Driving Assistant technology, and Dynamic Stability Control system which all work together to provide maximum stability in different driving conditions.

The interior of this luxurious sedan is designed to provide ultimate comfort and convenience for passengers with heated front seats, two LCD displays for driver information, dual climate control systems, Bluetooth connectivity, a navigation system with voice activation technology, an Apple CarPlay compatibility option, USB port connections and much more.

Low Fuel Pressure

If you’re a car owner, you know that low fuel pressure can be an incredibly frustrating and expensive problem to deal with.

Low fuel pressure can cause poor engine performance, stalling, or even complete failure in some cases. It’s important to understand what causes it so you can take steps toward preventing it from happening again.

Low fuel pressure is caused by several different factors, including a weak or failing pump, clogged filter(s), faulty injectors, bad wiring/connections or worn-out seals/gaskets in the system.

The most common culprit is a failing pump due to age and normal wear-and-tear on the vehicle. A weak pump will not generate enough pressure to get the necessary amount of fuel into your engine’s cylinders for combustion.

This leads to decreased power output and reduced efficiency as well as other problems such as difficult starting or stalls during acceleration.

Also Read: P1594 Charging System Voltage Too High

Fuel Pressure Sensor

Fuel Pressure Sensor

If you’re looking for a way to keep your vehicle running smoothly and efficiently, then you should consider investing in a fuel pressure sensor.

This device is designed to measure the amount of fuel that flows into the engine and ensure that it is at an adequate level.

A fuel pressure sensor can provide important information about the performance of your vehicle, as well as prevent costly engine repairs down the line.

What does a fuel pressure sensor do? In short, this device measures how much fuel is actually being delivered to the engine by monitoring its pressure levels.

When there’s too little or too much pressure, it will trigger an alarm so that you can take action before any serious damage occurs.

Symptoms Of A Bad Fuel Rail Pressure Sensor


P1290 error code related to high CNG fuel pressure requires a systematic approach and a good understanding of the CNG fuel system.

By following the diagnostic steps outlined in this article, you can pinpoint the root cause of the issue and take appropriate actions to resolve it.

Timely addressing of the issue not only restores your vehicle’s performance but also contributes to its long-term health and efficiency.