MO 899 vs MO 339 Oil Filter

Most people don’t know that there are two different types of oil filters in the market, and it can be hard to tell the difference between MO 899 vs MO 339 oil filters if you’ve never seen them before. One might think they’re the same filter, but there’s a vast difference between them.

MO 899 vs MO 339 Oil Filter

MO 899 vs MO 339 Oil Filter Difference

MO 899MO 339
1/4″ higher than the 399339 is 1/2″ smaller than 899
Longer filtered Shorter filtered 
Support 2014 modesDon’t support the 2014 model

A difference in capacity between the two filters is 1.0 quarts. Molino 899 has a 60-month filter life and MolyMo 339 has a 100-month filter life. The threaded connection of Moen 899 is 1/4-inch NPT, whereas the threaded connection of Moen 339 is 3/8-inch NPT.

The Moen 899 weighs 2.0 pounds, and Moen 339 weighs 2.75 pounds. The body volume of the Moen 899 is 0.43 inches and that of the Moen 339 is 0.50 inches.

MO 899 Oil Filter

Oil filter comparison of a typical high-quality synthetic filter. MO 899 is an oil filter that may be used for severe duty applications instead of the normal MO 339. It has a larger absolute volume and outside diameter than the MO 339, providing a greater number of INBO or MPSA entries.

This filter can be used with any engine that uses O-ring oil seals. MO 849 Oil Filter Oil filter comparison of a typical lower quality synthetic filter.

1. LMParts MO-899 Dd Oil Filter 

The filter element used in Corvair is going through severe duty. If normal MO-339s get plugged up, use this filter with a high-volume oil pump to prevent engine starvation.

(1) MO 899 is a direct replacement for the MO 339 (p/n 03-010302AA] but provides a larger outside diameter and volume to prevent plugging under extreme duty service. It takes 25% more oil than the standard filter.

LMParts Engine Oil Filter MO-899 Ddodge Challenger Single Premium Oil Change OEM

Features

  • The MO-899 oil filter element is larger than the standard MO 339 oil filter to provide more entry areas for very large and heavy-duty engines – like those in General Motors (GM) cars and trucks or gross-weight vehicles.
  • This filter is recommended for severe duty service on Corvair engines with a capacity of at least The filter element volume is about 1,145 cc (1.4 GPM).

Read More About Jeep Grand Cherokee Traction Control Problems

2. Motorcraft Oil Filter

LMParts MO-339 Oil Filter 

Standard oil filter for AMX, GL, and most 2.2 liter engines. It is also used in some 2.8 liters of GM cars/trucks such as the Chevrolet Camaro/Corvette using a high volume oil pump with either a cap or lock on the oiling system. This filter should not be used in gross or V8 service or other severe duty applications unless an approved filter is suitable for your application.

Motorcraft FL-820-S Oil Filter

Features

  • Filters are designed to protect engines from excessive wear and damage from dirt and abrasive sludge. 
  • The standard cartridge has a filter element consisting of a non-woven medium with pleats, chemical treating agents, and a synthetic layer. 
  • Higher-quality filters have mediums made of cotton or cellulose fibers and are more durable than standard cartridges. 
  • The oil strainer design provides better cleaning in dirty conditions than standard cartridge filters but at the cost of more frequent oil filter changes.

MO 339  Oil Filter

The MO 339 Oil Filter is a high-quality, premium filter that fits both the Mercedes Benz C-Class (W204) as well as the Audi A3. They have a multi-layer filter media consisting of synthetic base cloth, precoat, and wound glass mat.

The bio-plasma film has anti-microbial properties that work to prevent sludge and slime build and it features self-healing properties in case of leaks.

1. MOPAR oil filter 

They are made to exact tolerances and are engineered to provide outstanding engine protection throughout their service life while meeting or exceeding the markets they serve. MOPAR oil filters contain a polyester base that is specially treated to resist the heat and pressure demands of today’s modern engines.

MOPAR Genuine Parts oil filter M0-339 for vehicles

Features

  • The special polyester base impregnated with special synthetic resins and high-quality glass fibers allows for a high oil flow rate to pass through the filter media. 
  • The oil flow rate is controlled by a pin-on sealing gasket that seals tightly on both sides of the base plate.
  • The filter cartridge has special wick technology in which each element attracts, steers, and traps the oil particles from flowing to the outside edges.

2. Mopar 339 Oil Filter

Over the past decade, Mopar has become the most popular choice for OEM oil filters. Beginning with their high-flow design, Mopar has developed an extensive line of oil filters to fit each application.

These include the original synthetic base (339), high-flow synthetic (345 and 355), and biological media (376). Today, Mopar continues to be a top choice for many different automotive manufacturers across the globe.

Features

  • The high-flow design has specially-treated synthetic fiber media combined with glass fibers that provide the ultimate protection for your vehicle.
  • This filter has a special wick system that naturally attracts and captures oil particles. The wicks are treated with anti-drain back properties that allow oil to drain back into the sump at maximum efficiency.
Mopar MO-339 Oil Filter

Read More About Jeep Grand Cherokee Rack And Pinion Problems

MO -899 vs MO -090

Since 2001, Mopar has been a top choice for many different automotive manufacturers across the globe. The revolutionary MOPAR Filter design is specifically engineered for easy removal and installation. It will provide outstanding engine protection throughout its service life while meeting or exceeding the markets it serves.

Each MOPAR Oil Filter is made to exact tolerances and is engineered to provide outstanding engine protection throughout its service life while meeting or exceeding the markets they serve.

04892339ab vs 04892339aa

A big difference is the construction material. 04892339ab has 2 layers of synthetic media while 04892339aa has 4 layers of synthetic media. 04892339aa is also a Brazilian filter while the 04892339ab is an American filter.

With greater than 13 million vehicles sold, MOPAR has a worldwide reputation for design and quality. This reputation was built on a simple thought: If it ain’t broke, don’t fix it. A combination of Mopar’s engineering and design teams has produced unparalleled quality and performance in every product, from the most basic to industry-leading performance parts.

MO -339 oil filter fits what vehicle

MO -339 oil filter fits the following vehicles:

The Mopar oil filters are available in two variations, 04892339aa or 04892339ab, depending on the type of vehicle. These numbers correspond with Rockwell Automotive’s Part Number. 

MO -339 oil filter ram 1500

The Mopar oil filters are available in two variations, 04892339aa or 04892339ab, depending on the type of vehicle. These numbers correspond with Rockwell Automotive’s Part Number.

MO-339 Oil Filter 5.7l Hemi

Mopar 04892339aa “high flow” oil filter is available for Dodge vehicles with V8 engines. The vehicle must have an engine that has a 5.7 liter Hemi engine and a corporate 8-hole connector for the oil filter. This is located beneath the oil filter cap and can be found by looking at the top of the oil filter housing.

An important tip when changing fuel filters

When changing your Mopar oil filter it is highly recommended that you change the fuel filter simultaneously. This will ensure that your vehicle is running well for many miles to come and protect against premature wear.

Always remember to use Chevron Supreme Plus 04892339aa/ 04892339ab or better yet genuine Mopar fuel filter 04892339aa/04892339ab when replacing your fuel filter. These Mopar filters are incompatible with the cheaper and inferior fuel filters that are sold by many other brands.

The MOPAR oil filters are available in two versions, 04892339aa or 04892339ab, depending on the type of vehicle. These numbers correspond with Rockwell Automotive’s Part Number. 

An important tip when changing fuel filters. When changing your Mopar oil filter it is highly recommended that you change the fuel filter at the same time.

Dodge models that take either Mopar 04892339aa or 04892339ab are:

The 04892339aa is available in all of Mopar’s standard colors, namely black and silver, with the exception of the color red.  The Mopar 04892339ab is available in only a few colors, namely black and silver. Covers come prepared with hose clamps and gaskets.

Mopar Oil Filter: Wal-Mart 

Conclusion

MO 899 vs MO 339 Oil Filter are two brands of oil filters, with each being better suited for certain vehicle engines. If your engine is an Audi, BMW, Mercedes-Benz, Volkswagen, or any other German brand of the car then you should be using the MO 899.

On the other hand, if your engine uses diesel fuel then you would need the MO 339 Oil Filter.