Jeep Grand Cherokee Water Pump Problems – Reasons & Solution

The water pump is responsible for circulating coolant through the engine to keep it running at the proper temperature. If the water pump fails, the engine can overheat and cause serious damage.

Jeep Grand Cherokee Water Pump Problems may indicate your water pump needs to be replaced: coolant spilling out on the ground or under the hood, squealing noise coming from the engine compartment or radiator area, and steam coming from under the hood where your radiator is located.

  • The engine overheating 
  • The temperature gauge reading high
  • Steam coming from under the hood 
  • A squealing noise from the engine bay If you notice any of these symptoms, it’s important to take your Jeep to a mechanic as soon as possible to have the water pump checked out.

Ignoring these warning signs could lead to costly repairs down the road.

Jeep Grand Cherokee Water Pump Problems

Jeep Grand Cherokee Water Pump Problems

Unfortunately, the jeep grand Cherokee is a frequent victim of water pump problems. Water pumps, when they go bad, can cause overheating and engine failure. 

1. Leaks and noises

If your water pump is leaking, then a few things will happen: the transmission and engine will both lose significant amounts of power and the cooling system will be compromised.

The first sign of a leak is coolant dripping on the ground or under the hood. And this can be caused by problems with your drive belts or pulleys, worn-out tensioners, and even worn-out seals from your upper radiator hose. It can also be caused by a loose water pump, which is usually caused by overheating issues or bearing wear.

2. Bearing wear

If your water pump is using bearings to turn, and these bearings are worn out, then your pump will start wobbling which will cause excessive noise, and eventually, the pump will fail.

3. Overheating issues

If you are experiencing overheating issues, then a leak in your cooling system would not be surprising. Overheating may be caused by a buildup of debris on the radiator or a worn-out water pump that is not turning enough.

4. Steam

Once your water pump begins to fail and leak, then you will start seeing steam coming out of your hood. And steam coming from under the hood is a clear indicator that you have a major problem on your hands.

How do I know if my Jeep water pump is bad?

There are a few ways to determine if your water pump is bad or not. You can start by listening to any unusual noises coming from the engine compartment, especially near the radiator area.

After that, you can try checking the level of your coolant and if it is low then chances are your water pump has gone bad. You can also do some prodding and poking around under the hood to see if you notice any leakages or other signs of movement from the pump.

  • Coolant Leaking
  • Overheating.
  • Steam coming out from the hood.
  • Squealing noise from the engine compartment.
  • Any unusual noises coming from the engine compartment.

Be sure to check your coolant level when you are inspecting for leaks or for fluids on the ground as well. You don’t want to be stranded somewhere and find out you have a leak in your cooling system.

How do I know if my Jeep water pump is bad

Read More About Jeep Grand Cherokee 3.7 Misfire Problem

What happens if the fuel pump on a Jeep Grand Cherokee goes bad?

If your fuel pump on a Grand Cherokee goes bad, you will likely experience problems starting the vehicle and cranking. This can be caused by electrical issues, bad fuel pump relay contacts, or external leaks around the fuel pump.

It is important to note that whenever you have electrical issues, they can also cause other problems such as the engine not getting a spark or not getting fuel. In this case, there may be something wrong with your distributor cap and rotor or ignition wires. However, the first thing you should check is the fuel pressure.

What is the fuel pump relay on a Jeep Grand Cherokee?

The fuel pump relay sits in between your power supply and your fuel pump. If there are electrical problems or your battery goes dead, then that relay will activate to give you some time to plug in or jump your vehicle. The fuel pump relay can also be activated manually by manipulating its wiring if for some reason you need to bypass it for any reason.

What is the fuel filter on a Jeep Grand Cherokee?

The fuel filter sits in between your fuel pump and your fuel injectors to keep particulates and debris from messing with your engine. It is highly recommended that you change this filter on a regular basis because it can go bad over time. Remember, if you have any electrical problems, then you may be having issues with the fuel pump relay as well.

What sound does a bad water pump make?

Bad sounds coming from your water pump can be very frustrating. Many people mistake the sound of a bearing going bad for a water pump that is going bad. The sound of a water pump bearing going bad is a metallic smell and a high-pitched whining noise. The sound of an actual water pump going bad will be much more low-pitched and grinding.

How do you test a car water pump?

There are many things you can do to test your water pump. You can start by listening to noises coming from your engine compartment to check for bearing or gear issues. After that, you can try prodding along with the belt and pulleys to see if your water pump is wobbling or grinding and needs to be replaced.

  • Noises coming from the engine compartment.
  • Prodding along with the belt and pulleys.
  • The drive belts will start slipping if your water pump is bad.
  • Test until you can get the engine to start and run (this is what many people do).

How Do You Replace a Water Pump?

Replacing a water pump on your Jeep Grand Cherokee can be very intimidating if you have never done it before. However, it is something that will come with practice. And here at PartsGeek.com, we have a great step-by-step guide to replacing the water pump on your Grand Cherokee if you ever get yourself in a situation where you need to do it.

A few things the average person might not know about the water pump:

This large device sits uppermost in the cooling system and requires no external power. It turns over with a small amount of force provided by its own bearings and gears driven by a camshaft mounted on the crankshaft.

The pump itself is a part of the engine and can be very difficult to work on. Many times, it is more cost-effective to replace the entire component rather than the individual pieces.

How Do You Replace a Water Pump

When replacing a water pump What else should you replace?

It is important to check the condition of your radiator and hoses. If they are leaking in any way, then chances are that your old water pump is just more of the same old problems.

However, a new radiator is not necessarily going to solve the problem. A brand-new radiator may not fix the leak if the leaking areas in your cooling system are through the engine block or your radiator core.

How do you know if a Jeep Grand Cherokee water pump has failed?

If you notice an abnormally large amount of sludge in your coolant reservoir and you are getting very high engine temperatures, then it may be time for a new water pump. This can also be caused by a blown head gasket or cracked head or block.

One of the biggest signs of a bad water pump is overheating. The Jeep’s cooling system has many different parts that must work in perfect harmony for the engine to operate properly. Other signs are periodic temperature spikes, leakage from your radiator or headlights, noise coming from the engine area, and rough idle and stall.

Jeep Grand Cherokee Water Pump Cost

If you need a new water pump, then the average cost of a Jeep Grand Cherokee water pump is around $250 depending on what part of the country you are in. If you use an online company such as PartsGeek.com, then the shipping cost is already built into your online order.

Jeep Grand Cherokee Water Pump Recall

If you own a Jeep Grand Cherokee, there’s a good chance your vehicle is affected by the recent water pump recall. Approximately 1.1 million vehicles are included in the recall, which was announced by Fiat Chrysler on Friday. The recall affects Jeep Grand Cherokees from model years 2012-2014 with 3.6-liter engines.

According to Fiat Chrysler, a problem with the water pump can cause the engine to overheat, leading to reduced power and increased fuel consumption. In some cases, the engine may shut down completely. If you own one of the affected vehicles, Fiat Chrysler will notify you and schedule a free repair.

The repairs will be made at no cost to you and should take about an hour to complete.

Jeep Grand Cherokee Water Pump Warranty

If you own a Jeep Grand Cherokee, you may be wondering what the water pump warranty is. The answer may surprise you – there is no factory warranty on the water pump. However, this does not mean that your Jeep is not covered if the water pump fails.

In fact, most Jeep dealerships will cover the cost of a new water pump under the powertrain warranty. So, if your Jeep Grand Cherokee’s water pump fails, don’t worry – you are still covered. Just take it to your nearest Jeep dealership and they will take care of everything for you.

2014 Jeep Grand Cherokee Water Pump Problems

If you own a 2014 Jeep Grand Cherokee, you may be having problems with the water pump. The water pump is responsible for circulating coolant throughout the engine, and if it fails, the engine can overheat.

There have been reports of water pumps failing prematurely on the 2014 Jeep Grand Cherokees, so if your water pump is making noise or leaking coolant, it’s important to get it checked out by a mechanic as soon as possible.

One common symptom of a failing water pump is an overheating engine. If your Jeep’s engine is running hot, especially in stop-and-go traffic or when idling for long periods of time, it could be due to a faulty water pump. Another symptom to watch out for is coolant leaks.

If you notice coolant pooled under your Jeep or dripping from the front of the engine, it’s likely that the water pump needs to be replaced. If you’re experiencing either of these symptoms or if your water pump simply isn’t working properly, take your Jeep to a qualified mechanic right away.

Replacing a water pump isn’t typically a difficult job, but it’s important to make sure that it’s done correctly in order to avoid further damage to your engine.

Jeep Grand Cherokee Water Pump Replacement

If your Jeep Grand Cherokee is leaking coolant, it may be time to replace the water pump. This is a relatively easy repair that you can do at home with a few tools. Before you begin, make sure that you have all of the necessary tools and parts.

You will need a new water pump, gasket sealant, and a few other basic hand tools. Once you have everything gathered, follow these steps to replace your water pump. 1. Disconnect the negative battery cable to prevent electrocution while working on your Jeep Grand Cherokee.

2. Drain the cooling system by removing the radiator cap and opening the drain valve at the bottom of the radiator. Place a large pan underneath to catch any coolant that drains out. 3. Remove the drive belts from the pulleys on the water pump using a wrench or socket set.

Take care not to damage the belt as you remove it. If there are any other accessories mounted on the same pulley, remove them as well before proceeding.

2018 Jeep Grand Cherokee Water Pump Recall

Recently, Jeep announced a recall of almost 184,000 Grand Cherokees from the 2018 model year. The reason for the recall is an issue with the water pump, which could potentially lead to engine overheating. Jeep says that it’s aware of one incident where this actually happened, but no injuries have been reported.

If you own a 2018 Grand Cherokee, be sure to check and see if your vehicle is included in the recall. You can do this by visiting Jeep’s website or calling their customer service line. If your vehicle is included, they will provide instructions on how to get it fixed.

In the meantime, keep an eye on your engine temperature gauge and be sure to stop driving if it starts to get too hot.

2018 Jeep Grand Cherokee Water Pump Recall

Read Also Jeep Grand Cherokee Body Control Module Problems

2018 Jeep Grand Cherokee Water Pump Replacement

The 2018 Jeep Grand Cherokee is a great vehicle, but like all vehicles, it will eventually need some maintenance. One of the most common repairs that will be needed is a water pump replacement. The water pump is responsible for circulating coolant throughout the engine, and if it fails, the engine can overheat.

Fortunately, this is a relatively easy repair to do yourself, and we’ll show you how. First, you’ll need to purchase a new water pump. You can find these at most auto parts stores or online retailers.

Disconnect the electrical connector from it (if applicable), then remove any bolts or brackets holding it in place. Carefully pull it out and set it aside. Now take your new water pump and reverse these steps to install it in place of the old one.

Once everything is bolted or clipped back into place, reconnect the electrical connector (again, if applicable) and close up the hood. Start up your Jeep and let it idle for a few minutes so that the new water pump can circulate coolant through the engine properly. After that, you’re all set.

This simple repair will keep your Jeep running smoothly for years to come.

2018 Jeep Grand Cherokee Water Pump Warranty

The 2018 Jeep Grand Cherokee comes with a 3-year/36,000-mile basic warranty and a 5-year/60,000-mile powertrain warranty. But what does that mean for the water pump?

The water pump is covered under the powertrain warranty, so if it fails within five years or 60,000 miles (whichever comes first), you shouldn’t have to pay a dime for repairs. Also, keep in mind that the powertrain warranty only covers major components like the engine and transmission not everything in the car.

So, if something else goes wrong with the water pump (like a loose hose), you’ll be on the hook for those repairs. But overall, having a water pump failure covered under warranty is a big win for Grand Cherokee owners.

It’s just another example of how Jeep has your back when it comes to keeping your SUV running smoothly for years to come.

2017 Jeep Grand Cherokee Water Pump Recall

The 2017 Jeep Grand Cherokee is being recalled for a problem with the water pump. The recall affects vehicles equipped with a 3.6-liter V6 engine. The recall was announced by Fiat Chrysler Automobiles on Thursday.

The automaker says that a software glitch can cause the water pump to fail, leading to engine overheating. Fiat Chrysler says it is aware of one accident and two injuries that may be related to the problem. The recall covers about 14,000 vehicles in the United States and Canada.

Owners will be notified by mail and advised to take their vehicle to a dealer for repairs, which will be done at no cost to them.

How Do I Know If My Jeep Grand Cherokee Water Pump is Bad?

If your Jeep Grand Cherokee water pump is bad, there are a few things you can look for to be sure. First, check the engine coolant level and make sure it’s full. If it’s low, that could be a sign of a leak in the system somewhere.

Next, start the engine and let it idle for a few minutes. Then feel the top radiator hose. If it’s hot to the touch, that means the water pump is circulating coolant through the engine.

Finally, open the hood and listen for any unusual noises coming from the water pump area.

What are the Signs of a Faulty Water Pump?

If your car’s water pump is going bad, you’ll likely see one or more of the following signs:

  1. Leaking coolant: A water pump is responsible for circulating coolant throughout your engine, and if it starts to leak, you’ll see coolant dripping from the front or back of the engine block.
  2. Overheating engine: If your water pump is leaking, it can’t circulate enough coolant to keep your engine at a normal operating temperature. As a result, your engine may start to overheat.
  3. Squealing noise: If you hear a squealing noise coming from the front of your engine, it could be an indication that your water pump bearings are starting to fail.
  4. Grinding noise: A grinding noise may also be heard if the water pump impeller is damaged or worn out.
What are the Signs of a Faulty Water Pump

How Much Does It Cost to Replace a Water Pump in a Jeep Grand Cherokee?

If your Jeep Grand Cherokee is having issues with its water pump, it may be time for a replacement. But how much does this repair cost? The average cost to replace a water pump in a Jeep Grand Cherokee is between $600 and $900.

This includes the cost of parts and labor. The exact price will depend on the year and model of your vehicle as well as the severity of the issue. If you think your Jeep Grand Cherokee might need a new water pump, take it to a mechanic for an inspection.

They can diagnose the problem and let you know if a replacement is necessary.

WATER PUMP & BYPASS HOSE REPLACEMENT

Conclusion

If you’re having problems with your water pump, there’s a good chance it’s because of one of these four issues. First, the water pump could be damaged. Second, the impeller could be damaged.

Third, the seals could be damaged. Fourth, the bearings could be damaged. If you’re experiencing any of these problems, it’s best to take your Jeep Grand Cherokee to a mechanic and have them take a look.