How To Turn Off Auto Park Brake On Jeep Wrangler

The process for turning off the automatic parking brake on a jeep wrangler is relatively simple and can be done in just a few steps. 

How To Turn Off Auto Park Brake On Jeep Wrangler

You may hear a clicking noise as the brake is released. Finally, drive away normally. If you need to use your parking brake while driving, simply pull the lever back down to engage it.

1. Open your Jeep vehicle settings

• Open your Jeep vehicle settings Click the “Driving Mode” tab
• Click the “Driving Mode” tab Scroll down to find “Auto Park Brake”
• Scroll down to find “Auto Park Brake” Click on it and click Change Auto Park Brake Settings.
• Underneath the heading, click Off and confirm that you want to change it. 
• Now test your auto park brake by applying slight pressure in both directions. If you are happy with the braking force, save changes and exit settings.

2. Select Brakes

• Select Brakes Click on Auto Park Brake
• Click on Auto Park Brake Your Screen Will Look Like This
• Your Screen Will Look Like This Underneath, click “Dismiss”
• That’s it. Your brake will be off for good. Save your changes and exit settings.
• Click OK – Done.

3. Find the fuse box in your jeep wrangler

Find the fuse box in your jeep wrangler Open the cover. Open the cover Highlight USER OPTIONS. Highlight USER OPTIONS Fuse box picture to show you where it is. There are two “user” options in this fuse. They are on different sides of where you found it, but they are on the side that is closest to the dashboard (where you will see your gauges, etc).

4. Set to “Parking Brake”

Set to “Parking Brake” Open the cover. Open the cover Take a look at this picture of your Fuse Box and take note of where USER OPTIONS are on it. The fuse box picture shown is from a 2010 Jeep Wrangler, the location is similar for all years.

To set, highlight USER OPTIONS Use the “-” arrow to switch it to Parking Brake.

Use the “- ” arrow to switch it to Parking Brake. See the image below for an example.

See the image below for an example. The fuse box picture shown is from a 2010 Jeep Wrangler, the location is similar for all years.

How to Turn off Auto Park Brake on Jeep Compass

If you own a Jeep Compass, you may have noticed that the Auto Park Brake feature is turned on by default. 

This feature can be turned off by following these simple steps:

1. Start the Jeep Compass and press the “Menu” button on the instrument panel.
2. Use the arrow keys to scroll through the menu options until you reach the “Vehicle Settings” option. Press the “Enter” key to select this option. 
3. Use the arrow keys to scroll through the vehicle settings until you reach the “Auto Park Brake” setting. Press the “Enter” key to select this setting.
4. Use the arrow keys to scroll through the options for the Auto Park Brake setting until you reach the “Off” position.

How to Turn off Auto Park Brake on Jeep Gladiator

If you’ve ever had your Jeep Gladiator’s Auto Park Brake engage while driving, you know it can be quite a pain. The good news is that there is a way to turn it off.

Here’s how:

1. Start by putting your Jeep in the park and turning off the engine. 
2. Next, locate the Auto Park Brake switch on the dash. It should be near the steering column on the driver’s side.
3. Flip the switch to the “off” position. You may hear a clicking noise as the brake releases. 

You can now continue driving without worrying about the Auto Park Brake engaging unexpectedly.

How to Turn off Automatic Parking Brake Jeep Renegade

If you have a Jeep Renegade, you may be wondering how to turn off the automatic parking brake.

Here’s how:

1. Start with the engine off and the transmission in Park.
2. Press and hold the brake pedal for five seconds. 
3. Turn the key to the On position without starting the engine.
4. Press and release the brake pedal three times within five seconds. The parking brake light on the instrument panel should turn off. 
5. Start the engine to verify that the parking brake is released.

How to Turn off Auto Park Brake on Jeep Grand Cherokee

If you have a Jeep Grand Cherokee, you may have noticed that the Auto Park Brake feature is turned on by default. This can be annoying if you’re trying to park on a hill or in a tight space.

Here’s how to turn off the Auto Park Brake:

1. Press the brake pedal and hold it down. 
2. While holding the brake pedal down, press and release the “Auto Park” button on the dash. The button is located just to the left of the steering wheel.
3. The “Auto Park” light on the dash will turn off, indicating that the feature has been disabled. 
4. You can now release the brake pedal and proceed with parking your Jeep as usual.

How to Turn off Auto Park Brake on Jeep Cherokee

If you own a Jeep Cherokee, you may be wondering how to turn off the auto park brake. The good news is that it’s actually quite simple. Here’s what you need to do:

1. Put your Jeep in the park. 
2. Press and hold the button on the dash that says “Auto Park Brake.” 
3. While holding the button, press and release the foot brake pedal three times.
4. Release the button and your Jeep’s auto park brake will be disengaged.

Jeep Auto Park Brake Must Be Turned off by

If your Jeep has an automatic parking brake, you must remember to turn it off before driving. If you don’t, the parking brake may engage while you’re driving and cause your Jeep to stop suddenly.

Here’s how to turn off the parking brake:

1. Put your Jeep in the park. 
2. Press the brake pedal down firmly with your right foot. 
3. Push the button on the end of the shift lever to release the parking brake. The button is usually red or black. 
4. Take your foot off the brake pedal and press it again lightly to make sure that the parking brake is fully released.

How to Turn off Automatic Parking Brake Jeep Compass 2022

If you have a Jeep Compass 2022, you may be wondering how to turn off the automatic parking brake. Here’s what you need to know. To turn off the automatic parking brake on your Jeep Compass 2022, simply press and hold the button on the center console.

After a few seconds, the parking brake will disengage and you’ll be able to drive away. It’s that easy. 

The Auto Park Brake Must Be Turned off by

Most drivers are not aware that their car has an auto park brake feature and if they are, they don’t know how to properly operate it. The auto park brake is a great safety feature that can prevent your car from rolling away if it’s not in Park. However, if you don’t turn off the auto park brake before driving, it can cause problems.

Here’s what you need to know about the auto park brake and how to properly turn it off. The auto park brake is a feature that is found on most modern cars. It is designed to keep your car from rolling away when it’s not in Park.

To activate the auto park brake, you simply pull up on the parking brake lever. This will engage the brakes and prevent your car from rolling. When you’re ready to drive, you must remember to disengage the auto park brake by pushing down on the lever.

If you forget to do this, your car will likely jerk forward when you step on the gas pedal. While the auto park brake is a great safety feature, it’s important to remember to disengage it before driving. Otherwise, you may find yourself in an unpleasant situation.

Why Does My Jeep Wrangler Go into Auto Park?

One of the most common questions we get here at the shop is “Why does my Jeep Wrangler go into the auto park?” There can be a few different reasons for this, so let’s take a look at each one. The first reason your Jeep Wrangler might go into the auto park is that the battery is disconnected or low on power.

If your battery is disconnected, simply reconnect it and see if that solves the problem. If your battery is low on power, try charging it overnight to see if that helps. Another reason your Jeep Wrangler might go into the auto park is that there’s something wrong with the transmission.

This is a more serious issue and will likely require professional help to fix it. If you think this might be the problem, take your Jeep to a mechanic or dealership to have it checked out. Finally, another possibility is that the Auto Park feature itself is turned on in your Jeep’s settings.

To check this, open up the Settings menu and navigate to the “Auto Park” setting. If it’s turned on, simply turn it off and see if that solves the problem. If none of these solutions work, then there could be an underlying issue with your Jeep that will require professional help to fix.

In any case, taking it to a mechanic or dealership should be your next step so they can diagnose and solve the problem for you.

How Do I Turn off Auto Park?

If you have a car with an automatic transmission, there’s a good chance it has what’s called an “Auto Park.” This feature allows the car to automatically shift into Park when you turn off the ignition. But what if you want to disable Auto Park?

There are a few reasons why you might want to do this. Maybe you’re worried about accidentally leaving your car in Park and draining the battery. Or maybe you’ve had problems with the Auto Park feature itself and you just want to disable it.

Whatever the reason, turning off Auto Park is actually pretty easy to do. In most cases, all you need to do is press and hold the button that activates it (usually located on the shifter). Once the light on the button turns off, Auto Park will be disabled.

Of course, every car is different, so it’s always a good idea to consult your owner’s manual before disabling any safety features. But in general, disabling Auto Park is a pretty simple process.

How Do You Turn off the Emergency Brake on a Jeep Wrangler?

Assuming you are talking about the parking/emergency brake: To turn off the emergency brake on a Jeep Wrangler, first put the vehicle in park. Then, press down on the pedal with your right foot and pull up on the release lever with your left hand.

Why Does My Parking Brake Automatically Engage Jeep Renegade?

One of the most common questions we get here at the shop is, “Why does my parking brake automatically engage on my Jeep Renegade?” Here’s what you need to know. When you first start your Jeep Renegade, the parking brake is automatically engaged.

This is done for your safety and the safety of others around you. The parking brake is designed to keep your vehicle from rolling away when it’s not in motion. There are a few reasons why your parking brake may stay engaged after you start driving.

One reason could be that the park pawl (the part of the transmission that engages when you put your vehicle in park) isn’t disengaging properly. Another possibility is that there’s something wrong with your brakes themselves, preventing them from releasing fully.

If you notice that your parking brake stays engaged even after you’ve started driving, it’s important to have it checked out by a professional as soon as possible.

Driving with the parking brake on can damage your brakes and make them less effective overall. It can also lead to other problems down the road if not fixed promptly. If you’re having trouble with your parking brake engaging automatically on your Jeep Renegade, bring it into our shop and we’ll be happy to take a look.

Is Autopark disabled in 4 Lo?

Yes, go to Tow/Haul mode then turn off the automatic park brake. If you have a four-wheel drive, you’ll need to enable the “Tow/Haul” mode before continuing with this procedure.

Once in tow/haul mode, follow these steps:

1. Turn on your hazard lights and pull back on the parking brake for about a minute or so. 
2. Make sure the vehicle is not in drive. 
3. Press and hold the “Off” button on the back of your turn signal stalk. The message “NOT CONNECTED” should appear on your dash until you release the switch. 
4. Turn on your hazard lights again, then pull back on the parking brake again for about a minute. 
5. Release the parking brake and set it to either come on automatically or by pressing a button (unlock/safe in most cars).

The best way to turn off the automatic Park Brake on a Jeep Wrangler is to use the Electronic Vehicle Information Center (EVIC). The EVIC can be found on a Jeep Wrangler by pressing the “SIR” button on the middle console, followed by “4 LO” or by pressing “4LO” on the dash.

Once in 4Lo, put your foot on the brake and press both buttons next to P which is labeled with arrows.

Do you have to close the door when shifting into Park?

The Jeep Wrangler functions as a conventional four-door car and therefore features an automatic door lock that remains engaged when the Jeep is in Park. This means that the driver must still close the door before taking their foot off the brake, whether or not they are in the park.

4Lo can also be set for Automatic Start/Stop (if your Jeep has this feature). Otherwise, press down on the main brake pedal to engage 4Lo, then release your foot from the brake pedal to start up and stop.

Read More About: Jeep Selec Trac Problems

Is it possible to disable Auto Park on the JL?

Yes, some owners have modified their Jeep Wrangler JL to disable Auto Park. The following information can be found in the Wrangler Owner’s Manual: “WARNING

Before You Disable Autopark, Be Sure You Can Safely Drive Along with No Brakes 

If you have a vehicle or trailer with a tow package, you must not disable Autopark when towing with a trailer that has enough load capacity to block or prevent the brakes from operating.

How do you turn on the auto park?

There are several ways you can turn on the Auto Park feature:

• Press the “On” button on the function switch (also known as the switchgear) located at the top of your dashboard. Use the switches on this panel only to turn your Jeep Wrangler into the park, neutral, or reverse functions.
• Press and hold down on the brake pedal. You’ll hear a beep to recognize that Autopark is turned on when you release pressure on the pedal.
• Turn on the ignition and leave your vehicle in any gear. The Auto Park system will automatically engage if you release pressure on the brake pedal for about 10 seconds.

The Auto Park feature can also be turned off by pressing and holding the “off” button on your switchgear or turning off the ignition.

Note: If you leave Auto Park on, it will disengage when you’re driving and you begin to release pressure from the brake pedal.

Why is my park brake automatically engaging?

The parking brake on your Jeep Wrangler engages when you press the brake pedal, even if you’re not stopping at a stop sign or stop light. The parking brake engages to make sure that you can safely pull out into traffic.

Is there any way I can turn off the parking brake?

No, it cannot be turned off. To fully disable your vehicle’s auto-park system, you will have to disable the brake feel and the reverse lights by removing their fuses.

How do I know if I have a manual or auto park?

The JK Wrangler comes standard with an auto lock in the front and an automatic park brake. Your manual parking brake is on a set of inner drum brakes, the axle shafts are not connected to the drum.

It’s really not necessary to use a parking brake cable in this application. Your drum parking brake will come on automatically when you push the regular brake pedal as your automatic parking system does. 

Access to your manual drum parking brakes is in front of and between the front tires, right below the hood. It’s important to note that no discounting of your JK’s value, or legal action can occur if you choose not to use your manual drum brakes at all. While most people do not use them in daily driving, they can be used if desired.

How do I turn off the parking brake engaged?

It is unlikely. The parking brake engagement is there to keep the vehicle from rolling if you have put it in gear yet have not stepped on the brakes. Many cars these days do not have that feature any longer, including most new JL models.

In fact, it isn’t very safe to disable that feature as if you disengage the parking brake while driving, it may make it difficult to apply the regular brakes quickly enough to stop the vehicle and avoid a collision.

How do I turn off park brake maintenance mode?

Park Brake Maintenance Mode is automatically activated after 5 minutes with the parking brake on. It will automatically disengage after 10 minutes, but it can also be manually turned off by pressing and holding the “off” button of your switchgear or turning off the engine.

If you have a four-wheel drive, you’ll need to enable the “Tow/Haul” mode before continuing with this procedure. Doing so will allow for the rear end of your Jeep to drop on its own, which allows for easier access to the manual parking brakes.

To engage the parking brake, you’ll want to start by placing your transmission in neutral. This can be done by moving both the gear shifter and transfer case selector lever into a neutral position. The reverse lights should come on if you did it correctly. If they don’t, pull over and check your connections again.

FAQs

How Do You Turn off Rear Parksense Braking Assist?

If your vehicle is equipped with ParkSense rear park assist, you can easily turn it off using the settings menu on your Uconnect system. Here’s how:

1. Press the “Menu” button on your Uconnect touchscreen.
2. Select “Settings” from the main menu.
3. Scroll down and select “Vehicle Settings.”
4. Scroll down and select “ParkSense.”
5. Toggle the ParkSense switch to the “Off” position. That’s it. You’ve now successfully turned off your ParkSense rear park assist system.

How Do You Use Jeep Auto Park?

Assuming you are referring to the Jeep Wrangler’s Automatic Park feature: To engage Automatic Park, put the transmission in REVERSE and hold the brake pedal. Then, press and release the PARK button on the shifter.

The system will automatically engage the parking brake and shift into PARK when it detects that your vehicle has come to a stop. To disengage Automatic Park, simply press and release the UNLOCK button on the shifter.

Where is the EPB switch located?

The EPB switch is located between the driver’s door and the steering wheel. Theory: When a shift lever is moved from Park to ANY other position, the parking brake automatically engages using an electronic switch, so if you’re in “any other park”, you don’t want the brake to engage when you shift to that position.

Jeep Cherokee – How to turn on/off the parking brake

Conclusion

If your Jeep Wrangler is equipped with the auto park brake feature, you can turn it off by following these simple steps. First, put the transmission in Park and turn off the engine. Next, depress the brake pedal and hold it down while you press the button on the dash that says “Auto Park Brake Off.”

The light on the button will illuminate to indicate that the system is now disabled. You now know How To Turn Off Auto Park Brake On Jeep Wrangler.